Sisters Tutorial

Sisters.

Supplies  needed-paint shop pro, any version will do

My sister word art you can down load here

http://www.4shared.com/file/5W7Y4KXf/Sisters_word_art.html

Mask of your choice. I am using mask created by cat-370 you can down load them here

http://insatiabledreams.net/Cat_s_Masks_too.html

The scrap kit I used, is from wishing upon a star, you can visit here blog here, 

say thank you when you down load her beautiful kit

http://wishing-onastarr.blogspot.com/

Tubes I used you can find here but you must have a license to use her tubes

http://www.gorjussarthome.com

No outside filters were used, let's have some fun.

Open up psp and the scrap kit, you may chose any paper you like, I chose

paper 13. Lets go to new image/650x530 copy and paste your paper, re size 75 percent.

Next open up the mask, go to layers/new mask layer,/source luminance. Click o.k

Now copy and paste the mask to your paper new layer. Make sure it is centered.

As you can see by my example I colorized my paper, you can too if you like to match your tubes.

 Next open up the staircase, copy paste as a new layer, re size 75 percent, make sure it is in the middle, Duplicate, slide this one over to the left hand side so that is is sitting on the edge

of the mask.

Open up the tubes your going to use, re size to fit. Place your first tube halfway

down the stairs, and your second tube should be a sitting tube. Place this one

at the bottom of the stairs See mine for placement. Next pick a flower you like from the kit

Re size 50 percent and place it on the left hand side of the first tube/duplicate, move down

to the second tube/duplicate again/mirror and place next to the second tube on the bottom to the right. Now on your layers pallet, make sure the flowers are under the tube layers.

I also added another flower at the top  see mine for placement, Get creative and add the flowers where you like.

Next back to your kit, and get doodle 23, copy paste, re size 50 percent, place it behind the first tube. See mine for placement. Next duplicate, move down just a little /image free rotate/20 percent. Now duplicate again/image mirror, place behind the second tube. See mine for placement

I also added a small drop shadow. That is up to you.

Next open up my word art, copy and paste, again see my example for placement.

If you want to add any extras, you can do that now, as you can see I added a

couple little butterflies, now merge/merge visable. Save as a jpeg/or png.

I hope you enjoyed my tutorial as much as I did writing for you, if you like my

work please let me know.

Again I want to thank wishing upon a star for her beautiful kit and thank you to

cat for her masks.

This tutorial was written by Brattys Dezinz

http://purepurrfectioncreatorscornor.blogspot.com/

Easter Sunday

Easter Sunday.

Free To Use

Supplies Needed-Paint shop Pro any version will do.

Scrap kit- Easter Memories you can find here on my blog.

http://purepurrfectioncreatorscornor.blogspot.com/

Tube of your choice.

Mask by cat-I used mask 276. you can find them here

http://insatiabledreams.net/Cat_s_Masks_too.html

No outside plug-ins used.

This tutorial is written for beginners in  psp.

Step one.-open up the Easter memories kit.

Open up paint shop pro. go to file/new image/650x550

Next go to your tools on the left hand side, chose flood fill tool, and flood fill with white.

Next chose any paper your like, copy paste.

Re size/75percent.

Next open up the mask you chose, make it active layer

go to layers/new mask layer/from image/source luminance checked/ click ok.

Now copy and paste your mask onto the paper you chose. Now you should see the pattern.

Next on your layers pallet, merge/merge visiable.

Now chose a frame from the Easter memories kit

Copy/paste/re size 85 percent. On your layers

pallet make the frame layer active. When you click

on it it will be grey, so you know that is the active layer.

Next open up the tube your going to use,

next go to tools/chose your magic wand.

use these settings.

Rgb value

tolerance-10

feather -0

anti alias checked.

Now use your wand and click inside your frame. You will see the dancing ants. Now at the top go to selections

modify/expand by 2, click ok.

Next copy and paste your tube, and place it inside the ants, go back to selections/invert/ click ok.

I chose a frame with 3 sides, so if you did you can add your tube again the same way to the other  open frame.

Follow the same steps as before. see mine for position.

Next we are going to change one or 2 of the tubes, another color. Make one of the tube layers active,

go to adjust at the top/color/hue chose a color you like

by sliding the arrow. then click ok.

Next you can add any extras to your tag as you like. Go to the kit and pick what you like  re size 50 percent and paste where you want it to be.

Once your done adding any elements and your happy with the way it looks Go to layers pallet/merge/merge flat.

Save as a jpeg/or png.

I hope you enjoyed my beginner tutorial.

I would love to see your results.

This tutorial was written by Bratty’s Dezinz

http://purepurrfectioncreatorscornor.blogspot.com/

Good morning. I made this easy tutorial for beginners in psp. A friend 

of mine is just learning. Enjoy.

Here is another Tut I made Hope you like it

Reflections of a broken heart

Tutorial_Free to use

Supplies needed-paint shop pro I use x pro 3, but any version will do.

I can not supply the heart tubes because they are not mine. So you will

Need to go searching for a heart tube. I used a clear glow heart.

The chain and wire you can find on my blog, in my obsessions kit here

 I used the artwork of c.2010-2011 Charlie140588.deviant.com/Howl168155429.Tube of your choice.

Plug-ins I used was simple

http://purepurrfectioncreatorscornor.blogspot.com/

This tutorial was written by me, Brattys Dezinz

Now let’s begin and have some fun creating.

Open up paint shop pro, new image 650x214

Grab your flood fill tool and flood fill with a dark color

From your tube.

You will need to re size your tube so it fits nicely in the left

Hand corner. Re size copy and paste your tube, Duplicate/ image mirror

Move to the far right. Layers merge visible

Next go to effects/plug in Simple/quick tile, then Simple again/horizontal grain.

Next copy and paste your tube again and center it in the middle.

Next open up the wire from the obsessions kit, I re sized mine/35 percent

Copy and paste, on your layers pallet move the wire so it is behind your

Middle tube. Duplicate the wire and then image/free rotate/rotate to the left/20 percent.

Click back on your center tube, go to layer pallet/blend modes/ chose dodge.

This will change the way your middle tube will look. You can even try other blends.

Now we need to make the small frame that goes around your middle tube, so.

Let’s go to new image/300x300, next go to your tools on the left and  find

The shapes tool. Next click on the rectangle/ then the square.

Chose the dark color from your tube and draw a square.

Make sure before you draw, that you make your background color transparent.

Stroke with 15. Change the vector to a raster layer/right click and convert.

Next copy and paste your frame and place it over your middle tube, now you may have to play around some and re size to fit. Once you like the way it fits. On

Your layers pallet move the middle tube so it is under your frame.

And again play around with it until it is nicely centered.

Add a small drop shadow.

Next open up the chain. Re size 35 percent, and you can colorize it to your liking

I made mine dark grey so that it matches.

Next open up your heart tube. Re size if needed, and place it on top

Of the chain, so it looks like it is hanging. Duplicate/ move it to the other

Part of the chain. See my tag for the example.

Next lets go back to your heart tube, re size it again so it is very small,

I re sized mine about 35 percent. Then copy and paste the heart and move it

To the far bottom left hand corner, Duplicate/ image mirror. You

Should have a heart in both corners now.

Lets go back to the first very small heart , make that layer active, then go to

Effects/simple/ quick tile. Then do the same for the other small

Heart on the right, pretty neat right?

Now again back to the left hand side small heart, make it the active layer, then

on your layer pallet, chose burn, see it made it black. Now lets do it on

the other heart.. Now if you look at your tag you should see small hearts

in all areas.

Now lets make a boarder, go to your tools then go to your selection tool

chose rectangle, with these settings.

Mode: replace

Feather:0

Anti-alias checked.

Now with your tool start at the top/left about an inch wide, and make it so that it goes

all the way to the bottom, then flood fill with your dark color, do the same on the

right side. Selections/select none.

Next go to effects/ texture effects/weave and use these settings

Gap size 1

Width 1

Opacity 100

weave color, use your dark color

gap color/ white

fill gaps checked.

Make the left hand side where you flood filled your color active, then apply the

weave effect. Repeat on the right hand side.

Add a small drop shadow, if you like.

Now for the top and bottom boarders, you will repeat the same steps

as we did for the sides, but your with will be half an inch size.

Now merge all layers, save as a jpeg/ or png.

I hope you enjoyed this tutorial as much as I did creating it.

Brattys Dezinz

Please stop by my blog.

And if you like my work don’t be afraid to say so;)

http://purepurrfectioncreatorscornor.blogspot.com/    

Here is my very first tutorial

Demons Desire

Tutorial-Free to use.

Supplies needed-paint shop pro, I use xpro 3 but any version will do.

Supplies- Obsession Scrap Kit you can find here on my blog

http://purepurrfectioncreatorscornor.blogspot.com/

Mask-by Cat I used her mask 600, you can find them here

Great masks, thank you cat.

http://insatiabledreams.net/Cat_s_Masks_too.html

Tubes I used is by Janice leotti.  You must have a lic.

to use her tubes. You can find her tubes here

http://www.cdoestore.com/

This tutorial was written by Brattys Dezinz, my blog

http://purepurrfectioncreatorscornor.blogspot.com/

Plug-ins I used was Simple. Horizontal grain.

Please do not claim this tutorial as your own

Now let’s have some fun.

Open up your psp. New image 600/600

Flood fill with black.

Open up the mask, go to layers, new mask layer, from image.

Next copy and paste your mask onto the black you flood filled.

Feel free to center your mask how you like it.

I put mine right in the center, and re sized it  to make it a little  bigger.

Next open up the Obsession kit, find the black frame.

Copy and paste/re size it how you like and rotate a little to the left.

Now duplicate and move under the first black frame. See my tag for position.

Next select paper 5, with your magic wand, click on the first black frame.

so you see the dancing ants, then go to selections, modify expand by 2, then

copy and paste paper 5 and then go back to selections and then invert, then delete.

You will do the same thing for the black frame 2.

Next open up the wire and copy and paste it, duplicate and rotate to the right

just a little.

On your layers pallet, move your wires so that they are behind the frames.

Next open up your 3 tubes, copy and paste tube one and place it to the far left

corner of frame 1 and re size to fit, you may have to use your

selection tool and take off any extra that is hanging over the frame.

On your layers pallet move the tube under the frame, this way it looks nice

and neat.

Next open up tube 2, the one with the rose, do the same thing you did with tube 1

see above.

Next open up tube 3, place this tube on the far right bottom edge

of the frame so it looks like she is sitting. Re size to fit.

Next back to the black frame,. chose a paper again same instructions as before

but this time you will re size the frame, re size it in half, copy and paste

tube 1 and place it to the far left again, re size to fit, layers pallet move  tube

under the frame.  Open up tube 2 again, you will do the same for this tube and re size the black frame, half size again, and place the second tube to the far right.

Re size to fit.

Once your happy with the way it looks, move it under the large black frames

so it fits nicely next to it. Slide it under the black frame just a little.

Next you will duplicate this small frame, and then move it all the way to

the top right hand side and place this one under the black big frame, just like you did

on the last one.

Next click back on the small frame 1. go to your plug in, simple then horizontial grain.

Next click on the small frame 2, then go to effects

photo effects, black and white film.

You can add a small drop shadow to both small frames.

Next open up flower 2, re size and place where I have mine

again you can add a small drop shadow to the flowers.

Next I added some small leaves and small flowers,

here you can add any extras you would like.

Next layers/merge all. Re size. Save as a jpeg pr png.

I hope you enjoyed this tutorial as much as I did creating it.

Brattys Dezinz

Please stop by my blog Thank you.

http://purepurrfectioncreatorscornor.blogspot.com/